OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05B7

Invalid Data Received From Rear Radar Module A

Rear radar modules are hidden in the corners of the rear bumper and feed blind spot warning, rear cross traffic alert and the exit warning that watches for cyclists when a door opens. Mercedes-Benz stores U05B755 on the 2026 CLA electric when the rear radar on the outer left sends implausible data because it is not configured; the driver assistance controller N62/5 then keeps several functions offline. Bulletin LI54.71-P-080345 (versions 1 and 2) has the N62/5 calibrated by teach-in, or alternatively by the calibration drive used after a bumper has been replaced. U05B7 thus points to a sensor that answers but is not accepted, unlike U02B6, where it no longer answers at all. Drivers notice a missing blind spot lamp on the left and assistance messages; driveability is unchanged.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / B7

Possible causes

  • Left rear radar not configured in the assistance controller high
  • Rear bumper repaired or repainted, sensor mount or cover altered medium
  • Moisture or corrosion at the rear radar connector low

Symptoms

  • Blind spot indicator on the left stays off
  • Rear cross traffic and exit warnings unavailable
  • Assistance unavailable message in the instrument cluster

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U05B7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication