OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05B2

Invalid Data Received From Comfort and Convenience Display A

Stellantis calls its touch screens for climate, seat and similar comfort settings Comfort and Convenience Display Modules (CCDM); the Jeep Grand Wagoneer has one up front and a second one for rear passengers. U05B2 is logged when a receiver gets traffic from display A whose content is implausible. Which of the screens carries letter A is not published. Two field cases show what typically goes wrong: phantom touches that alter fan speed on their own, cured by a front or rear display with newer firmware (STAR S228A000013 Rev. A), and, on the 2025 Wagoneer S, massage graphics offered for seats without massage, fixed with a later part number and a proxi alignment (S2508000061). No manufacturer cites U05B2 itself; U02B1 is the lost-communication partner.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / B2

Possible causes

  • Display firmware with known faults, newer part number available high
  • Display configuration not matching vehicle equipment, proxi alignment missing medium
  • Touch panel or display electronics defective medium
  • Loose or corroded connector at the display low

Symptoms

  • Climate or seat settings change without input
  • Display shows functions the vehicle does not have
  • Comfort controls on the screen respond late or not at all

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U05B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication