OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05AC

Invalid Data Received From Vehicle Thermal Management Control Module

Electrified cars increasingly run cabin, battery and drive-unit cooling from one thermal management controller that commands pumps, valves, fans and the refrigerant circuit; suppliers such as Hirain and Marelli sell such units, Marelli explicitly with OBD compliance. For hybrids, CARB requires the electronic parts used for battery and inverter cooling or heating to be monitored and, where feasible, the cooling performance itself. U05AC is stored when that controller's status or temperature messages reach another module with invalid content. Audi reports the partner U02AB, the thermal management unit 00C5 not reachable, on the 2025/26 A5, Q5 and S5 with a software fix (index entry only). No maker documents U05AC itself. Charging and drive power may be limited to protect the battery.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / AC

Possible causes

  • Thermal management controller software out of date high
  • Faulty temperature or pressure sensor feeding the controller medium
  • Controller internally faulty low

Symptoms

  • Various warning messages in the cluster
  • Reduced charging or drive power
  • Climate control not working properly

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U05AC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication