U05AB
Invalid Data Received From Engine Disconnect Clutch
In parallel hybrids the engine disconnect clutch sits between engine crankshaft and electric machine; opened, it lets the car drive electrically with the engine off, closed, it starts the engine or adds its torque. Ford's patents describe the clutch being prestroked so it is filled with pressure before an engine start is requested, and being advanced before the hydraulic pump spins down. Where the clutch has its own smart actuator or position sensor on the network, U05AB records that its reports of position, pressure or state arrive but are implausible. No manufacturer documents U05AB or its partner U02AA publicly. Without trustworthy clutch data the hybrid controller can no longer blend engine starts safely, so electric driving, engine start-stop or hybrid assist are typically restricted.
Possible causes
- Clutch actuator electronics or position sensor faulty medium
- Actuator and hybrid controller software not matched or adaptation lost medium
- Wiring or connector at the transmission bell housing damaged low
Symptoms
- Hybrid system warning and check engine light
- Electric driving unavailable, engine runs continuously
- Jerky engine starts
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U05AB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.