OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05AA

Invalid Data Received From Charge Air Cooler Coolant Pump

Engines with a water-cooled charge air cooler use an electric pump, often a LIN slave of the engine controller, to move coolant through the low-temperature circuit. CARB requires the charge air cooling to be checked for performance and its electronic parts to be monitored. U05AA is set when the pump reports speed, current or fault bits that do not make sense. Public maker documentation exists for the partner U02A9: GM's 2025 tables declare lost LIN contact after 2.5 s without a pump response, Type A; Ram 1500 owners see a check engine light with U02A9 and P023B from pushed-out terminals at the pump connector; Mercedes links U02A900 on GLC and GLE to the PTCU software or LIN wiring. None documents U05AA itself. Expect reduced boost if intake air runs hot.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / AA

Possible causes

  • Pushed-out or corroded terminals at the pump connector high
  • Fault elsewhere on the shared LIN bus or in the master module software medium
  • Pump electronics or motor faulty medium

Symptoms

  • Check engine light on
  • Reduced engine power in hot conditions
  • Coolant warning or radiator fan running at full speed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U05AA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication