U05A8
Invalid Data Received From NOx Sensor C
A third NOx sensor appears on exhaust systems with two SCR stages, where sensor C watches the gas after the second catalyst. GM's 2025 ECM tables (25OBDG04B) are the public example: the engine controller checks alive rolling count and checksum of the post-second-catalyst NOx signals, eight failures in 18 samples or three in ten depending on the signal, with battery voltage of at least 11 V for 5 s, and logs U05A8 as Type B. The companion 25OBDG04A set has no such entry. U02A1 covers loss of sensor C messages, U05A9 the case where sensor C refuses engine data, U059E and U059F the first two sensors. The second SCR stage cannot be judged while the code is present.
Possible causes
- Control unit of NOx sensor C faulty high
- Harness or connector of the rearmost sensor damaged medium
- Sensors swapped between positions during repair low
Symptoms
- Check engine light after two trips
- SCR monitor for the second catalyst incomplete
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U05A8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.