OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05A6

Invalid Data Received From Reductant Heater Control Module

Diesel exhaust fluid freezes at about -11 °C, and EU rules demanded that it be usable within 20 minutes after a start at -15 °C, so tanks, pumps and lines get electric heaters. Where these heaters are driven by a separate control module, it reports heater states, temperatures and faults to the engine or dosing controller over the bus. U05A6 is stored when those reports arrive but are inconsistent or corrupt. No manufacturer documents this code publicly. CARB 1968.2 requires every component that feeds the emission control or its inducement to be monitored, which covers thaw control. U02A5 means the module is silent, P20B9 points to a heater circuit itself. In cold weather, dosing may start late and warnings may appear.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / A6

Possible causes

  • Heater control module electronics faulty medium
  • Water or salt corrosion at module connector or bus wiring medium
  • Software levels of heater module and engine controller do not fit low

Symptoms

  • Check engine light or DEF system warning
  • Delayed DEF dosing after cold starts

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U05A6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication