U05A3
Invalid Data Received From Reductant Quality Module
A reductant quality module checks that the tank holds proper diesel exhaust fluid, a 32.5 % urea solution. SSI's TULC sensor, for example, derives concentration from the speed of sound and reports it with level and temperature over J1939 CAN to the dosing control unit. This code means those reports arrive but are rejected. FCA documents it for the 2019 Jeep Cherokee 2.2 diesel (EMEA): bulletin 18-088-20 reprograms the dosing control unit when U05A3 appears with a MIL, often together with P20F4/P20F5 consumption faults. CARB 1968.2 demands that every input used by the low-quality inducement be monitored. Ford sets U02A2 when the module's messages are missing for 5 s. The driver may see a DEF warning, and inducement can follow if it persists.
Possible causes
- Dosing control unit software misreading the module (FCA reflash) high
- Quality sensor fouled by crystals or contaminated fluid medium
- Corroded connector at the DEF tank sender low
Symptoms
- Check engine light and DEF warning
- Reductant consumption faults stored alongside
- Possible speed or restart limitation if not fixed
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U05A3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.