U059F
Invalid Data Received From NOx Sensor B
Sensor B is normally the tailpipe NOx sensor behind the SCR catalyst, so its readings decide whether the catalyst efficiency test passes. The code means its CAN frames are present but unusable. GM's 2025 diesel tables run the same counter, protection value and checksum test as for sensor A, here on the post-catalyst signal set, and treat it as Type B. FCA lists it for Ram 3500 to 5500 Cab Chassis trucks with the 6.7 L Cummins: bulletin 18-012-13 (2012) and 18-042-20 (2014, calibration without ammonia delete) reflash the ECM because the light could come on with no hardware fault. U029E means the sensor is missing entirely, U05A2 that sensor B rejects engine data. A stored code blocks the SCR efficiency verdict, so check software before buying a sensor.
Possible causes
- Engine controller calibration known to flag false faults (FCA reflash) high
- Control unit of the downstream NOx sensor damaged medium
- Chafed wiring or water in the connector near the exhaust medium
Symptoms
- Check engine light on
- SCR efficiency monitor not completing
- No noticeable change in power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U059F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.