U059D
Invalid Data Received From Drive Motor Control Module D
Module D only exists where four drive motors are fitted, one per wheel. Rivian's R1T and R1S Quad-Motor are production examples: each wheel has its own motor, so a single faulty controller costs one corner of drive, not a whole axle. U059D records that the fourth controller keeps sending frames whose torque, speed or diagnostic content fails the receiving controller's checks. Ford's hybrid OBD description shows the usual check for electrified modules: a CAN message missing for 5 s sets the lost-communication code, a signal reporting invalid states for 5 s the invalid-data code (U0111 and U0412 for the battery energy control module). No manufacturer documents U059D publicly, so the corner it refers to and the reaction are maker-specific. A typical response is to switch off that motor, mirror the limit on the opposite wheel so the vehicle stays straight, and drop to a reduced power mode. Distinguish it from U029C, where the module is silent, and from codes B and C for the other motors.
Possible causes
- Inverter or controller of the fourth motor faulty medium
- Signal wiring at the wheel motor damaged by road debris or water medium
- Motor controller software not updated together with the others low
Symptoms
- Reduced power warning
- Off-road or performance modes locked
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U059D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.