U059A
Invalid Data Received From DC/DC Converter Control Module B
Converter B is a second DC/DC unit, used when one voltage support stage is not enough or when separate networks need their own supply. FCA is the only maker that names it publicly: in powertrain module updates for the 2019 Jeep Cherokee with the 3.2-litre V6 and engine stop-start (18-023-19 and follow-ups such as 18-020-21), the PCM lists both U0599 and U059A for invalid data from DC-to-DC converters A and B, plus U0299 for lost contact with converter 2. The customer complaint in those bulletins is a MIL and an engine that sometimes fails to restart after a stop-start event, and the fix is new PCM software rather than a new converter. A failing second converter mostly shows up as start-stop being withdrawn or electronics resetting during restarts.
Possible causes
- Powertrain controller software evaluating converter B data incorrectly (FCA 18-023-19) high
- Second DC/DC converter faulty medium
- Wiring or ground connection of converter B poor low
Symptoms
- Check engine light
- Engine does not restart after a stop-start event
- Stop-start function withdrawn
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U059A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.