OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0599

Invalid Data Received From DC/DC Converter Control Module A

On start-stop vehicles a DC/DC converter can hold the 12 V supply for sensitive electronics while the starter pulls the voltage down; on hybrids it feeds the 12 V network from the high-voltage battery. GM's 2025 engine tables check the converter's output voltage and crank-control messages for alive counter, protection value and checksum errors and set U0599, Type B, after 8 failures in 18 samples with at least 11 V for 5 s. GM bulletin 20-NA-191 for the 2020 Cadillac CT4 and CT5 with auto start/stop shows the code set falsely: the ECM miscalculated the protection value during cranking without boost, disabled start-stop on the first failure and lit the MIL on the second; an ECM reprogram fixed it. FCA lists U0599 for the 2019 Cherokee V6 ESS; Ford's 2014 list has it without MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 99

Possible causes

  • Engine controller software miscalculating the converter's protection value (GM 20-NA-191) high
  • DC/DC converter A electronics faulty medium
  • Weak 12 V battery causing deep voltage dips during cranking low

Symptoms

  • Auto start/stop disabled
  • Check engine light after repeated failures

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0599

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication