U0597
Invalid Data Received From AC/DC Converter Control Module A
In plug-in hybrids and electric cars the AC/DC converter is normally the on-board charger: it rectifies mains power and controls the current into the traction battery. CARB requires plug-in hybrids to detect charger faults that stop charging or reduce its rate. U0597 is logged when the charger's messages about state, voltage or current fail validation at the battery or vehicle controller. Public maker texts for U0597 are missing; the partner U0296 is documented by Volvo, whose 2022-on XC60 and XC90 plug-in hybrids store BCM2-U029600 together with an ESC warning and a blocked pure electric mode when a third-party dongle or Y-splitter loads the diagnostic connector. Interference of that kind can just as well corrupt data, so check for such devices first.
Possible causes
- Third-party dongle or Y-splitter on the diagnostic connector disturbing the bus (Volvo TJ 36559) medium
- On-board charger electronics faulty or overheated medium
- Charger or battery controller software out of date medium
Symptoms
- AC charging stops or runs at reduced rate
- Electric-only mode unavailable on plug-in hybrids
- Warning lamps such as ESC or check engine
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0597
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.