U0595
Invalid Data Received From Powertrain Control Monitor Module
A powertrain control monitor module is an independent supervisor that recomputes torque, engine speed or pedal requests and compares them with what the main controller commands, so that unintended acceleration or deceleration can be caught. U0595 is stored when that supervisor's results arrive but cannot be trusted. Ford's 2014 code list contains the partner U0294, lost communication with the powertrain control monitor module, marked with the wrench lamp only, not the MIL. How such monitoring is reported is visible in Ford's 2024 summary: its electronic throttle monitor sets supervision and torque plausibility faults with the wrench lamp, some also with MIL. No manufacturer documents U0595 itself. Drivers should expect reduced power or a limp mode.
Possible causes
- Software mismatch between monitor module and main powertrain controller high
- Monitor module internally faulty medium
- Supply voltage dips or bus disturbances corrupting messages low
Symptoms
- Wrench or powertrain warning lamp on
- Reduced power or limp mode
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U0595
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.