OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0594

Invalid Data Received From Hybrid/EV Powertrain Control Module

The hybrid or EV powertrain controller coordinates engine, motors and battery, so many modules read its messages. Ford's hybrid OBD summary explains that the ABS module logs U0594 when wheel-torque or driver-demand signals from the HPCM are flagged invalid, unknown or faulted; Ford's 2014 list carries it with MIL and its 2024 summary sets U0594_48 for bad monitoring data with MIL and wrench lamp. GM's 2023 brake tables expect serial data 31 from the module and set U0594, Type B, after 20 consecutive wrong authentication codes or a frozen alive counter. FCA names it implausible data from the HCP: on the 2020–21 Ram 1500 eTorque a poorly seated motor-generator connector led to stalling and a new MGU. Ford also found harmless U0594 entries in the Escape cluster and Lightning heat pump valve module.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 94

Possible causes

  • Fault inside the hybrid system makes the controller mark its signals invalid (e.g. MGU connector on Ram eTorque) high
  • Software of the hybrid controller or the receiving module out of date high
  • CAN wiring or termination disturbed low

Symptoms

  • Check engine light and hybrid or electrical system warning
  • Reduced power or stalling on some hybrids
  • Stored code without symptoms (Ford Escape, F-150 Lightning)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0594

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication