OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0593

Invalid Data Received From Drive Motor Control Module B

Electric vehicles with one motor per axle typically report the second inverter and motor as drive motor module B; on the 2019 Audi e-tron that is the rear unit, whose loss Audi logs as U0292 when a chafed low-voltage harness cuts it off. U0593 is set when that module keeps transmitting but its torque or status data are untrustworthy. GM documents U0593 in its 2025 brake controller tables (25OBDG03B), where it is described as invalid data from the hybrid e-motor powertrain control module: the brake module expects the brake axle torque and estimated gear messages, flags a stuck alive counter or a wrong authentication code after 10 consecutive events within about 0.1 s, and treats it as Type B. Regenerative braking and torque blending on that axle may be cut back.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 93

Possible causes

  • Low-voltage harness to the second drive unit chafed or connector loose high
  • Drive motor B inverter or receiver software out of date medium
  • Inverter B internally faulty low

Symptoms

  • Drive system warning, reduced power
  • Reduced or no regenerative braking
  • Vehicle drives on one axle only

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0593

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication