OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U058D

Invalid Data Received From Active Grille Air Shutter Module D

Module D is the fourth shutter position the code list reserves; it only matters on front ends with four separately driven flap sets, for instance two upper and two lower ones. No manufacturer documents U058D or names a shutter D in public material, so its exact placement remains maker-specific. The code means that frames from that actuator reach the engine controller but are judged unusable, for example because the alive counter stalls or the checksum is wrong; GM's shutter B check in the 2025 tables (25OBDG04B) shows the usual form of such a test, with MIL after two trips. CARB lists grill shutters among active off-cycle technologies whose activity must be tracked. In practice the affected flaps freeze, which barely changes driving. U028C covers total loss of the module.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 8D

Possible causes

  • Shutter D wiring or LIN connector damaged by road debris or moisture high
  • Actuator D electronics faulty medium
  • Engine controller configured for a shutter layout that does not match the vehicle low

Symptoms

  • Check engine light on some vehicles
  • One flap set does not move

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U058D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication