OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U058C

Invalid Data Received From Active Grille Air Shutter Module C

A third grille shutter unit appears on vehicles that split the lower intake into several flaps. Hyundai is the clearest case: on the 2026 Palisade and Palisade Hybrid, the lower active air flaps use left and right actuators, and campaign 26-01-026H lists U028B, lost communication with shutter module C, among codes that light the engine lamp after water entered bumper connectors and corroded them. U058C covers the less drastic case where module C still sends status frames but the engine controller rejects their content. No maker publishes thresholds for U058C itself; GM's 2025 tables check counter, protection value and checksum on modules A and B (3 bad frames out of 10, Type B), a plausible pattern for C as well. With a stuck flap, warm-up and drag suffer slightly.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 8C

Possible causes

  • Water ingress and corrosion at the lower bumper connectors (Hyundai 26-01-026H) high
  • Shutter actuator C with internal electronics fault medium
  • Actuator of wrong variant or position fitted after a bumper repair low

Symptoms

  • Check engine light on
  • Active air flap warning message
  • Lower flaps stay in one position

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U058C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication