OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U058B

Invalid Data Received From Transmission Fluid Pump Module B

Some transmissions carry a second electrically driven oil pump with its own electronics, labelled module B, alongside or instead of a first one. Its job is to hold clutch pressure and lubrication while the combustion engine is off, so the receiving transmission or hybrid controller depends on the speed, current and fault status the pump reports. U058B is logged when those reports arrive but fail plausibility, counter or checksum checks. No manufacturer documents U058B or a pump B publicly. For pump A, Jeep replaces the in-pan electric pump on Wrangler and Grand Cherokee 4xe when lost communication U0287 appears with the MIL and limp mode. Expect start-stop or electric driving to be inhibited until the fault clears; U028A is the lost-communication partner.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 8B

Possible causes

  • Integrated electronics of electric pump B faulty high
  • Pump B connector or pass-through in the transmission case wet or loose medium
  • Pump firmware and transmission controller software not compatible low

Symptoms

  • Start-stop or electric drive mode unavailable
  • Transmission warning message
  • Delayed engagement after an engine restart

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U058B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication