OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U058A

Invalid Data Received From DC/AC Converter Control Module B

U058A refers to a second DC/AC converter. Two converters can make sense when outlets in the cab and in the cargo bed are fed separately or when a high-power unit is added to a small one. GM's 2023 Silverado and Sierra 1500 illustrate how optional such hardware is: because of the chip shortage, trucks built from September 2022 left the factory with the inverter for the 120 V instrument panel and bed outlets inactive and later received an accessory power control module plus a body control module reprogram. Mismatched configuration after such a retrofit is a plausible source of invalid data. No manufacturer documents U058A or names a converter B publicly. U0289 is the lost-communication code. Only the outlets are affected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 8A

Possible causes

  • Configuration not updated after fitting or retrofitting converter B high
  • Converter B internally faulty or overheated medium
  • Bus wiring to converter B damaged low

Symptoms

  • One group of outlets dead while others work
  • Outlet warning or service message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U058A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication