OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0588

Invalid Data Received From Transmission Fluid Pump Module A

An electric transmission fluid pump keeps clutch and line pressure up while the engine is stopped by start-stop or in electric hybrid driving. Many such pumps have their own electronics and report speed, current and faults to the transmission or hybrid controller. U0588 means those reports arrive but cannot be trusted. Ford's 2014 OBD code list includes U0588 as a continuously monitored code without MIL. The lost-communication partner U0287 is better documented: Jeep sets it with MIL and limp mode on Wrangler and Grand Cherokee 4xe and replaces the in-pan pump, Hyundai on the Santa Fe and Tucson 2.5 with 8-speed automatic, where Idle Stop and Go stops working. Invalid data usually leads to the same reactions.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 88

Possible causes

  • Electric pump or its integrated controller faulty high
  • Pump connector not fully latched or wet medium
  • Pump and transmission controller software not matched low

Symptoms

  • Start-stop function disabled
  • Service transmission or hybrid system message
  • Limp mode with limited gears on some hybrids

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0588

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication