OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0587

Invalid Data Received From Radiator Anti-Tamper Device

Some low-emission vehicles have a radiator coated with a catalyst that converts ground-level ozone, known as direct ozone reduction (DOR) or by BASF's trade name PremAir; it earns an emissions credit, and CARB then requires the OBD system to monitor it. A Ford patent filed by Swedish inventors describes the matching sensor: it is pressed into the radiator fins, reports radiator temperature, since the coating works above roughly 60 °C, and sends an encrypted message so the engine controller knows the original part is fitted; a frangible pin stops it being moved to another radiator. U0587 means that message arrives but fails verification or plausibility. No manufacturer documents U0587 publicly. U0286 is the lost-communication code.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 87

Possible causes

  • Radiator replaced with an uncoated part or sensor moved from another radiator high
  • Anti-tamper sensor internally faulty medium
  • Corroded connector or wiring at the radiator low

Symptoms

  • Check engine light on
  • No noticeable change in driving or cooling

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0587

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication