U0576
Invalid Data Received From Lighting Driver Control Module C
Lighting driver control module C is sending data that the receiver discards. The US standard FMVSS 108 explains why this matters for an adaptive driving beam: the system must recognise malfunctions, including a blocked sensor, switch to manual beam control until the fault is gone and show the driver a warning. Driver chips like TI's TPS92664 keep failsafe default settings in internal memory, so a lamp still lights without fresh commands. Lincoln fits its 2025 Navigator headlamps with four such driver modules, lettered A to D. U0576 and partner U0275 appear in no public service text, and which lamp C serves is unknown. Expect a lighting warning and manual beam switching; no MIL.
Possible causes
- Driver module C software fault, curable by an update medium
- Unstable supply or ground at the headlamp medium
- Lighting driver control module C internally faulty low
Symptoms
- Lighting system warning in the instrument cluster
- Automatic high beam replaced by manual switching
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0576
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.