OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0573

Invalid Data Received From Vehicle Motion Control Module B

U0573 is the B variant: invalid data from a second vehicle motion control module. A second unit makes sense where coordination tasks are split, for example lateral and longitudinal motion, or where a backup must take over for automated driving. Hitachi Astemo's patent explains why timing matters in such systems: actuator modules receive their instructions over a shared network that also carries other traffic, so each instruction refers to a common time frame. Data from B that arrive outside that frame, with stale counters or with values contradicting module A are rejected and stored as U0573. No manufacturer documents the code publicly, and no lost-communication code exists for this module. Coordinated functions are then reduced.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 73

Possible causes

  • Lost time synchronisation between module B and the actuator controllers high
  • Modules A and B on different software levels medium
  • Motion control module B internally faulty low

Symptoms

  • Warning about reduced chassis or assistance functions
  • Automated or semi-automated driving functions unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0573

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication