OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U056C

Invalid Data Received From Image Processing Sensor G

Image processing sensor G is sending frames that the receiving module refuses. Neither U056C nor a camera position for G is documented by a manufacturer. Its partner U026B, however, is on GM's list for 2015–2020 Escalades whose front fascia harness rubbed through at the right bumper bar: blown fuses F10DL, F19DR, F43UA or F46DR, dead front park, turn, daytime and cornering lamps, and messages for surround vision, park assist and adaptive cruise. Surround-view systems, pioneered by Infiniti with the EX35 of model year 2008 and sold by Chevrolet as Surround Vision, combine cameras at the front, rear and sides into a top-down picture. A sensor delivering bad data leaves a gap in that view or disables it. No MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 6C

Possible causes

  • Bumper or fascia harness rubbed through, shorting circuits and fuses high
  • Camera connector disturbed or misassembled after body repair medium
  • Image processing sensor G internally faulty low

Symptoms

  • Surround view shows a black segment or is unavailable
  • Blown fuses and front lamps out at the same time

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U056C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication