OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0569

Invalid Data Received From Image Processing Sensor D

Sensor D's frames reach the receiver, but their content fails its plausibility or protection checks. Which camera carries letter D is not published, and U0569 itself appears in no bulletin. GM ties the partner code U0268 to its active-safety network: on 2015–2020 Cadillac Escalade models, a front fascia harness chafed at the right end of the bumper bar could blow fuses and set U0268 together with U0265, U0269 and U026A–U026C, with surround-vision, park-assist and adaptive-cruise messages; the harness had to be repaired and rerouted. Near-range cameras for surround systems use very wide lenses of about 137 to 192 degrees and sit exposed in the body. If front lamps fail at the same time, check the fascia wiring first. No MIL.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 69

Possible causes

  • Front fascia or bumper harness chafed through (GM Escalade 2015–2020 pattern) high
  • Blown fuse leaving the sensor with unstable supply medium
  • Image processing sensor D internally faulty or damaged in a collision low

Symptoms

  • Surround-view, park-assist or adaptive-cruise service messages
  • Front park, turn, daytime or cornering lamps out at the same time
  • Several camera and radar codes stored together

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0569

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication