OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0568

Invalid Data Received From Image Processing Sensor C

U0568 means a receiver gets messages from image processing sensor C whose content it cannot trust. SAE only numbers these sensors; no manufacturer publishes which physical camera is C, and the partner U0267 appears in no public bulletin either. Typical consumers of a camera's object list are lane departure warning, traffic sign recognition and glare-free high beam. For the latter, the US lighting standard FMVSS 108 demands that the system detect malfunctions, including a blocked sensor, then revert to manual beam switching and warn the driver, so a lamp system fed with unusable camera data has to fall back to plain low and high beam. Expect such features to be greyed out; driving and emissions are unaffected.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 68

Possible causes

  • Software mismatch between sensor C and the receiving controller medium
  • Intermittent contact in the sensor connector or bus wiring medium
  • Image processing sensor C internally faulty low

Symptoms

  • Lane departure warning or traffic sign display unavailable
  • Automatic high beam falls back to manual switching with a warning

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0568

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication