OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0566

Invalid Data Received From Image Processing Sensor A

At GM, image processing sensor A is the front camera behind the windshield; its partner U0265 is called Front View Camera – Windshield in GM bulletins. GM's 2025 OBD tables show how U0566 is detected: the brake module and the EOCM3 driver-assist controller check rolling counters, checksums and message authentication on the camera's frames. EOCM3 sets it when 3 of 4 messages fail within about 3 seconds, the brake module after 3 counter errors in a window of 16, both only at 9–16 V and as Type C without MIL; adaptive cruise is switched off. On 2020 Cadillac CT4 and CT5 a resetting camera set U0566 with U0265 and P25A2, cut driver and steering assist, and P25A2 could light the MIL. Reprogramming the camera came first.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 66

Possible causes

  • Windshield camera software resets or sends faulty protection values (GM remedy is reprogramming) high
  • Front camera internally faulty when the fault recurs often (GM then replaces it) medium
  • Supply voltage dips or bus disturbances during start low

Symptoms

  • Service Driver Assist or Steering Assist Reduced message
  • Adaptive cruise and automatic braking functions unavailable
  • MIL possible only through accompanying brake-module code P25A2

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0566

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication