OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0562

Invalid Data Received From Seat Control Switch Module B

Switch module B is a second, separate seat switch unit, for the passenger side or another seat row; which position B denotes is not published by any manufacturer. Mercedes counts its seat switch groups by position, front left being SSE-VL, which points to one unit per seat. Lincoln shows the 2nd-row case: on 2025 Navigators with power second-row seats the switch would not move the seat fore and aft, with B167F:11 in the rear seat modules SCMK/SCML; running their configuration apps cured it (SSM 54226). So a switch fault may really be a seat module setup issue. U0562 means module B frames reach the bus but fail checks; U0261 means they stop, U0561 concerns switch A. No bulletin names U0562. The affected seat may not respond to its switch.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 62

Possible causes

  • Receiving seat module not configured for the installed switch and seat equipment medium
  • Software fault in the second seat switch module medium
  • Connector or harness under a movable seat damaged by seat travel or objects medium

Symptoms

  • Passenger or rear seat does not move when its switch is pressed
  • Seat moves only in some directions

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for U0562

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication