OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0560

Invalid Data Received From Electronic Brake Booster Control Module B

A second brake booster unit mainly appears in architectures built for automated driving, where a single electronic brake must not be a single point of failure. Bosch, for example, pairs its integrated power brake with a separate redundant brake unit that can stop the car if the primary unit fails. U0560 reports that the module labelled B sends data the receiver cannot use, for instance a status that contradicts the A unit or a frame with a wrong counter or checksum. No manufacturer documents U0560 publicly, and which physical unit carries the B label depends on the maker. U025F is the lost-communication counterpart. Losing redundancy usually triggers a warning and can disable assisted or automated driving functions.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 60

Possible causes

  • Secondary brake unit B internally faulty high
  • Software of the two brake units not matched after update or replacement medium
  • Separate supply or ground of unit B faulty low

Symptoms

  • Brake system warning lamp or message on
  • Driver assistance or automated functions unavailable

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0560

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication