U055F
Invalid Data Received From Electronic Brake Booster Control Module A
An electronic brake booster replaces the vacuum servo: a travel sensor reads the pedal and an electric motor supplies the assist, as in Bosch's iBooster, which also lets the brake system blend in regenerative braking and back up the stability control unit. U055F is set when booster A transmits but its data, such as pedal travel, assist status or pressure request, fail the receiver's checks. No manufacturer documents U055F publicly. Ford fits such a booster (EBB) to the 2020-2021 Escape, Bronco Sport, Explorer, Corsair and Aviator; an interrupted supply to the EBB there left a network code in the ABS module and lit the ABS and stability lamps. Lost communication is U025E. Expect warning lamps and possibly reduced assist.
Possible causes
- Booster control unit or its pedal travel sensor faulty high
- Supply interrupted or weak battery during start or service work medium
- Booster and ABS/ESC software not matched medium
- Bus wiring or connector at the booster damaged low
Symptoms
- ABS, brake or stability warning lamps on
- Harder pedal or changed pedal feel
- Regenerative braking or driver assistance functions limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for U055F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.