OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U055E

Invalid Data Received From Front Controls Interface Module B

Where the front switches are split over two panels, the second one is front controls interface module B. Ford uses exactly this name (FCIMB): on 2023 Transit vans with SYNC 3 Lite, rear-only parking aid and no front sensors, the parking aid disable switch sits in the FCIMB; for vehicles built between mid-March and early June 2023 it did nothing because the park aid module was misconfigured, fixed with the PAM configuration app (SSM 51837). That case shows that a fault visible at panel B can lie with the receiver. U055E covers B-panel frames that arrive with implausible content; U025D marks lost contact and U0557 the main panel A, which on the F-150 could freeze under heavy CAN load (SSM 46902). No bulletin cites U055E. Switches on the second panel may not work.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 5E

Possible causes

  • Receiving module configured for different equipment and misreading the panel B data medium
  • Software fault in the second control panel medium
  • Loose connector or damaged wiring behind the second panel low

Symptoms

  • Switches on the second front panel have no effect
  • Indicator lamps in the switches do not match the actual function state

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U055E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication