U055D
Invalid Data Received From Special Purpose Vehicle Control Module D
U055D is the last of the four special purpose controller codes. It is stored when frames from controller D reach the network but carry values the receiver rejects. No manufacturer documents it; even Ford, which names slot A in its 2024 summary as a non-MIL check, says nothing about B to D. In practice the code is most likely on heavily converted vehicles with several add-on units, where one controller may feed implausible values after a voltage dip, a partial software update or a wiring change. Unlike U025C, the lost-communication code, the controller is still transmitting, so power and ground are usually present and the content of the data is what needs checking. Driving is not normally restricted.
Possible causes
- Incomplete or interrupted software update of controller D high
- Voltage dip from heavy conversion loads corrupting controller D's output medium
- Controller D internally faulty low
Symptoms
- Individual conversion functions fail intermittently
- Fault entry without effect on engine or brakes
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U055D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.