OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U055C

Invalid Data Received From Special Purpose Vehicle Control Module C

With U055C a module rejects the content of messages sent by special purpose controller C, the third of four slots for conversion electronics. No maker publishes a code-specific description. Ford's body builder bulletin for the 2023 Super Duty points to a typical pitfall: the factory interface module, the infotainment unit and the body control module all need matching software before the upfitter tool can talk to them, and trucks built before a June 2023 cut-off require a reflash. Out-of-step software on either side therefore produces data the receiver cannot accept. Diagnosis starts with the conversion paperwork and software levels rather than with the vehicle's own modules. U025B covers total silence of controller C.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 5C

Possible causes

  • Software levels of conversion controller and vehicle modules out of step high
  • Conversion equipment added or changed without updating controller C medium
  • Damaged bus wiring in the conversion harness low

Symptoms

  • Functions controlled by the conversion do not respond as configured
  • Code appears after a software update or conversion work

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U055C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication