OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0557

Invalid Data Received From Front Controls Interface Module A

Front controls interface module A is the button panel in the center stack that reads keys and knobs for audio and climate and passes them on as bus messages; Ford calls it FCIM, GM the infotainment faceplate control module (Saab 9-5 2011, U0256). Ford shows how much depends on it: on 2015–2017 F-150 trucks heavy CAN traffic could freeze the FCIM, so A/C, radio and even window switch control failed intermittently with U0140, U0155, U0253, U0401 or U0452 in the FCIM; a battery reset and FCIM self-test came before any replacement (SSM 46902). U0557 stands for panel frames that arrive with invalid content, U0256 for absent ones, U055E for the second panel B. No bulletin cites U0557. Button presses may be ignored or trigger the wrong function.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 57

Possible causes

  • Control panel electronics locking up under high bus load medium
  • Control panel software fault or mismatch with the infotainment unit medium
  • Stuck button or liquid spilled into the panel producing invalid key states low
  • Front controls interface module A internally faulty low

Symptoms

  • Radio or climate buttons work only intermittently or not at all
  • Several warning lamps or messages appear together with the button failure

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0557

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication