U0556
Invalid Data Received From Front Display Interface Module
The front display interface module is the screen unit in the center of the dash; GM calls the matching node info display module (Saab 9-5 2011, U0255), Ford uses FDIM. The display mostly shows what other modules feed it. Ford examples: on the Escape (2016–2019) and Focus/C-Max (2016–2018) the FDIM ramps its backlight up and down in auto-dim mode, which looks like flicker but is normal (SSM 47748); on the 2020 Aviator the APIM configuration made the FDIM show the wrong number of radio presets (SSM 49092). U0556 is set by a receiver that gets FDIM frames, e.g. touch inputs or status, with implausible content; U0255 covers silence, U0558 the combined controls/display unit. No manufacturer documents U0556. Touch inputs may be ignored or the screen may act oddly.
Possible causes
- Display module software fault or level not matching the infotainment unit medium
- Wrong configuration of display or infotainment module after replacement or update medium
- Front display module internally faulty (touch sensor or electronics) low
Symptoms
- Touchscreen does not respond or reacts to inputs that were not made
- Wrong or incomplete content shown on the center display
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0556
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.