U0554
Invalid Data Received From Accessory Protocol Interface Module
Accessory protocol interface module is Ford's name for the SYNC computer (APIM), which, at least in the first SYNC generation, sits apart from the audio control module and talks to the high- and medium-speed CAN buses. Because the touchscreen sends drive mode, settings and configuration through it, wrong APIM data reach far: on the 2021–2023 Mustang Mach-E, APIM software let the drive mode fall back to normal with Drive Mode Not Available, partly with U0253 in the ABS (TSB 24-2012); on the 2020 Aviator a misconfigured APIM made the display show a wrong number of radio presets (SSM 49092). U0554 stands for APIM frames that arrive but are rejected; U0253 marks missing frames and U031F a software mismatch. No bulletin cites U0554 itself. Settings made on the screen may not take effect.
Possible causes
- Outdated or faulty SYNC/APIM software (often fixed by an over-the-air or dealer update) high
- APIM configuration not matching the vehicle equipment after replacement or update medium
- Receiving module (e.g. ABS) evaluating APIM data with outdated software low
Symptoms
- Drive mode or vehicle settings chosen on the touchscreen are not applied or fall back
- Wrong or incomplete information on the center display
- Code stored in another module without noticeable fault
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0554
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.