OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0552

Invalid Data Received From Running Board Control Module B

A second running board controller only makes sense where each side of the vehicle has its own electronics. A 2004 Ford patent for powered boards has one central module drive the left and right boards separately, so a design with one node per side is plausible, but no manufacturer publishes which side B would be. Ford, the best documented user of power running boards, fits a single RBM in the F-150, Super Duty and Expedition/Navigator; it drops from Auto to Off after a battery undervoltage event with U3003:16 (SSM 50154). U0552 means messages from module B arrive but fail plausibility; U0251 would mean they are missing. No manufacturer documents U0552 publicly. Typically one board stops deploying or the feature switches itself off.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 52

Possible causes

  • Battery undervoltage or discharged battery disturbing the running board electronics medium
  • Running board module software fault (Ford fixes comparable faults by reprogramming) medium
  • Corroded connector or chafed wiring at the board motor under the body medium
  • Running board control module B internally faulty low

Symptoms

  • Running board on one side no longer deploys or retracts
  • Running board setting changes from Auto to Off without driver input

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0552

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication