OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0551

Invalid Data Received From Impact Classification System Module

An impact classification system module helps the restraint system judge what kind of collision is under way, for example frontal, side or angled, and how severe it is, so that the right airbags and pretensioners fire at the right stage. U0551 means another module, typically the airbag or restraint controller, receives messages from this unit whose content fails its plausibility or integrity checks. No manufacturer has published a description or setting criteria for this code. Patents on bus-connected crash sensing such as US7832762 show why such traffic is protected: deployment decisions travel over the network to the protection devices. With the classification input in doubt, the airbag warning lamp comes on and the system cannot rely on that information. Treat it as a safety fault; a silent module gives U0250.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 51

Possible causes

  • Internal fault in the impact classification module medium
  • Module or restraint controller not configured/programmed after replacement or crash repair medium
  • Damaged wiring or connector after collision or interior work low

Symptoms

  • Airbag/SRS warning lamp on
  • Restraint system message in the instrument cluster
  • Passenger airbag status indicator behaving abnormally

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for U0551

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication