OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0550

Invalid Data Received From Side Obstacle Detection Control Module D

Module D is the fourth radar of a side obstacle system, in Ford terms SODCMD alongside SODL, SODR and SODCMC. Which corner it serves depends on the vehicle and is not stated in the public Ford bulletins. U0550 has no published manufacturer description; a module receiving data from unit D sets it when that data proves invalid, for example a signal outside its range or a sequence error. Because these radars sit in bumper corners, impact damage, a bent bracket or water in the plug often come before network faults, and after a bumper repair the replacement module must be given the vehicle's configuration (Ford SSM 51903). The driver notices side assistance or cross traffic alerts disabled, not a drivability problem. U024F is total loss; module C is U054F.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 50

Possible causes

  • Radar D or its bracket damaged by a bumper impact medium
  • Water ingress or corrosion at the module D connector medium
  • Replacement module D without vehicle configuration medium

Symptoms

  • Side assistance or cross traffic alert switched off
  • Warning message about a blocked or faulty sensor

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0550

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication