OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U054F

Invalid Data Received From Side Obstacle Detection Control Module C

Some vehicles carry more than two side obstacle radars, adding units for wider coverage of lane changes and crossing traffic. Ford names them side obstacle detection control modules C and D (SODCMC, SODCMD) next to the left and right units SODL and SODR. Its bulletin SSM 51903 covers Ford and Lincoln models of 2021 to 2023 that log U2100 or U3002 in these modules after replacement, when configuration or VIN had not been written. No public manufacturer text uses U054F itself. It signals that module C is transmitting, yet the receiver refuses the content. A newly fitted module whose configuration does not match the car is the most plausible source, ahead of wiring or connector faults. Drivers see side assistance messages, while driving behaviour is unaffected. U024E is lost communication with C; D is U0550.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 4F

Possible causes

  • Module C not configured or VIN not written after replacement high
  • Software level of module C outdated or incompatible medium
  • Harness or connector fault at module C low

Symptoms

  • Side assistance or blind spot warning message
  • Lane change or cross traffic warnings partly unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U054F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication