OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U054E

Invalid Data Received From Seat Control Module J

Ford calls the module that folds the third-row seats electrically both PFSM and seat control module J (SCMJ). On 2025–2026 Expedition and Navigator its software left the seats unwilling to fold when 3L, Both or 3R was pressed, restored by a relearn in which Both is held for one minute and then five seconds more (SSM 53681), and caused misaligned upright seats after an obstruction reset (SSM 54613). Since the module halts motion on an obstruction and reports seat position, wrong data from it can confuse switch and liftgate-area logic. U054E means its frames arrive but are rejected, while U024D marks missing frames; no bulletin cites U054E itself. Expect third-row folding to stop, to move only partly or to need another relearn.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 4E

Possible causes

  • Power fold seat module software fault high
  • Seat end positions lost after an obstruction event or power loss medium
  • Harness to the third-row seats damaged in the cargo area low

Symptoms

  • Third-row seats do not fold or unfold electrically
  • Seats stop part-way or end up misaligned

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U054E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication