U054B
Invalid Data Received From Interior Lighting Control Module A
Interior lighting control module A runs cabin illumination such as dome, footwell and ambient light strips, in newer cars often RGB LED nodes on a LIN line below the body controller. Microchip's reference ambient lighting module shows the data involved: the master sends a command frame with zone, colour shares and intensity and asks for a status frame in return, each protected by a LIN checksum at 10.4 kbit/s. When status content from module A arrives but is implausible or corrupted, the receiver stores U054B; if the module stays silent, U024A applies, and module B has U05C0. No manufacturer documents U054B. Courtesy lights may then stay off, colour or brightness may change unexpectedly, or entry lighting may fail.
Possible causes
- LED driver node or lighting module internally faulty medium
- Chafed LIN line or loose connector in trim or headliner medium
- Wrong vehicle configuration for the lighting variant low
Symptoms
- Interior or ambient lights stay off or flicker
- Ambient colour or brightness differs from the setting
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U054B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.