U0549
Invalid Data Received From Remote Accessory Module
No manufacturer explains in public what the remote accessory module is; the term shows up only in code lists, together with its lost-communication partner U0248. Going by the name, it is a body-side unit controlling accessories away from the main controllers, and it is distinct from the accessory protocol interface module covered by U0554. GM's Saab 9-5 documentation describes the supervision behind such codes: receivers watch for expected signals, substitute defaults when a signal is not valid and set a code against the sender, and its code list splits invalid data into subtypes such as wrong message counter, checksum error or implausible value. U0549 follows that scheme for this module. What stops working depends on the vehicle; driving is not affected.
Possible causes
- Remote accessory module internally faulty medium
- Retrofitted or upfitter equipment disturbing the module's data medium
- Low battery voltage or power interruption while the module was active low
Symptoms
- An accessory function controlled by this module does not work
- Code stored without noticeable effect
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0549
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/technical-description/data-link-communications-description-and-operation
- saabwisonline.com/9-5-9650/2011/3-electrical-system/bus-and-diagnostics-communication/fault-diagnosis-diagnostic-trouble-codes/control-module-u-code-list