OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0545

Invalid Data Received From Running Board Control Module A

Power running boards deploy when a door opens and retract when it closes or the vehicle moves; a running board control module (Ford: RBM) drives the motors and reports position and faults. U0545 means its data reach other modules but are rejected. Ford shows how closely the function is tied to other electronics: on the 2027 Expedition and Navigator the boards stopped and the cluster warned of a running board fault while the driver seat module held C1008:15/C1009:15 and other modules stored U0208 and U0244, traced to DSM software (SSM 55168). Earlier F-150, Super Duty and Expedition RBMs switched from Auto to Off after low battery voltage with U3003:16 (SSM 50154) or due to software (SSM 52411). No bulletin names U0545. Boards may stay extended or retracted.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 45

Possible causes

  • Software fault in the running board or hosting seat module medium
  • Low battery voltage event corrupting module data medium
  • Implausible motor position feedback from dirt, ice or corrosion at the board medium

Symptoms

  • Running boards do not deploy or retract, fault message in the cluster
  • Running board setting changes from Auto to Off by itself

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0545

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication