OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0543

Invalid Data Received From Headlamp Control Module B

Headlamp control module B is the second light controller, usually serving the headlamp opposite module A. Bentley's 2019-2020 Continental GT campaign (2056293/1) handles the two as light control left and right, at diagnostic addresses 29 and 39, and both needed new software when the outer daytime running lights failed. Jaguar's 2020 XE likewise names HCMA and HCMB (SSM74402). Which side B covers remains vehicle-specific. No public manufacturer text uses U0543; it marks data from B reaching the network in a form the receiver cannot accept. Matrix or bending light then normally falls back to a fixed low beam on the affected side, and a lighting warning appears. Swapping a headlamp without coding or running mismatched software levels left and right are typical triggers. U0242 means B is silent; A is U0542.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 43

Possible causes

  • Different or outdated software in headlamp module B compared with A high
  • Headlamp B replaced without coding medium
  • Internal fault in headlamp module B low

Symptoms

  • Lighting system warning in the cluster
  • Matrix or bending light on one side fixed to low beam
  • Daytime running light on one side out

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0543

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication