U0542
Invalid Data Received From Headlamp Control Module A
Headlamp control modules run adaptive lighting such as swivelling, levelling, matrix segments and LED daytime lights, frequently with one module per headlamp. U0542 means a receiver, for example the body or lighting master module, gets messages from module A that fail its checks. No manufacturer publishes text for U0542. Jaguar documents the units by letter: on the 2020 XE, headlamp control modules A and B stored false low-voltage faults for position and daytime lights because current and board voltage were sampled out of phase (SSM74402), and new software with a revised threshold was announced. Bentley's Continental GT treats the left and right light controllers as separate addresses for reprogramming. Expect a headlamp warning and adaptive features held in a default position. U0241 is lost communication.
Possible causes
- Headlamp module A software (reprogramming released) high
- Headlamp or module replaced without coding/configuration medium
- Moisture or corrosion at the headlamp connector low
Symptoms
- Check headlamp or lighting system warning
- Adaptive or cornering light not working on one side
- Daytime running light or position light affected
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0542
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.