OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U053B

Invalid Data Received From Image Processing Module A

Image processing modules evaluate camera data for assistance functions, and module A is the one most often named in service literature. GM's 2025 brake controller tables (25OBDG04A) check protection values and rolling counters in messages from the object fusion controller (EOCM); 3 errors in a window of 16 frames set U053B as Type C without MIL, and the test pauses outside 9 to 16 V. Ford's OBD summaries let the PCM store it, non-MIL, on Remote Park Assist and Auto Hitch programs. On the 2025 Maverick, IPMA software caused U053B:56 in the cluster (SSM 53385, update per SSM 54423). The 2025 Jeep Compass logs U053B 81 after a 12 V disconnect until the steering angle is relearned. GM's Lyriq bulletin PIC6500A lists it among codes held by the Lyriq camera processor. Lost communication is U023A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 3B

Possible causes

  • Software in image processing module A (update available, e.g. Ford Maverick) high
  • Steering angle not relearned after battery disconnect or transport mode (Jeep Compass) medium
  • Front camera not calibrated after windshield or module replacement medium
  • Supply voltage outside the valid window during start-up low

Symptoms

  • Lane keeping or adaptive cruise unavailable message
  • Remote park assist or automatic hitch function refused
  • Code stored without noticeable symptoms

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U053B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication