OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0534

Invalid Data Received From Side Obstacle Detection Control Module B

Module B is the right-hand rear corner radar in GM and Ford numbering: Saab's 2011 list calls U0233 the right side-object module, and Ford's Expedition/Navigator bulletin 24-2180 pairs U0233 with the right sensor. Toyota uses U0233 for the master sensor of the Tacoma blind spot system, where bulletin T-SB-0063-19 had both sensors replaced and re-aimed with a reflector tool. No manufacturer document cites U0534, so its setting criteria are not public. The code stands for traffic from the right unit that arrives normally but whose payload the receiving module rejects. Typical outcome: the right blind spot indicator stays dark, cross traffic alert is unavailable and a service message appears. A wet or damaged plug at the bumper is a frequent trigger. U0233 means the module is silent; the left unit is U0533.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 34

Possible causes

  • Moisture or corrosion at the right radar connector high
  • Right radar damaged or misaligned after a bumper impact medium
  • Internal fault or outdated software in the right radar module medium

Symptoms

  • Right mirror blind spot indicator not working
  • Cross traffic alert unavailable
  • Service message for the blind spot system

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0534

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication