OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0533

Invalid Data Received From Side Obstacle Detection Control Module A

Side obstacle detection modules are the corner radars behind the rear bumper that watch blind spots and crossing traffic. GM and Ford give letter A to the left unit: the 2011 Saab 9-5 code list names U0232 for the left side-object module, and Ford bulletin 24-2180 (Expedition/Navigator 2022-2024) logs U0232 in Ford's IPMA camera module together with faults of the left radar. Toyota instead labels U0232 as the slave sensor on the Tacoma. U0533 itself appears in no published manufacturer text; it would be set when the left module's frames reach the receiver but carry invalid content. The Ford case shows that mud, ice or corrosion at the sensor trigger false Blind Spot Not Available warnings. Blind spot and cross traffic alerts then switch off. U0232 is total loss, U0534 the right unit.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / 33

Possible causes

  • Mud, ice or damage at the left rear radar, bracket or bumper cover high
  • Water or corrosion in the radar connector or harness medium
  • Radar module software or configuration fault medium

Symptoms

  • Blind spot monitoring unavailable message
  • Left mirror warning indicator inoperative
  • Rear cross traffic alert switched off

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0533

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication